Enter assign mode – press and hold the top and bottom buttons of the Pico wireless control until the LED begins to flash (approximately 6 seconds). Note: The Pico control will automatically exit assign …

The OmniLogic HLWIRELESS Wireless Terminal is a rechargeable touchscreen remote control for Hayward OmniLogic. The terminal is wireless and portable. Its unique watertight housing and floating …

Button Identification The small LED at the top of remote turns red when transmitting. The red LED is also the pairing button. The ‘ON’ button will only turn on the Volt Edge Receiver. The ‘OFF’ button will …

Locate the hole in the backside of the wireless remote, near the bottom. Insert the paper clip "leg" into the hole until you hear a click, and remove the clip. A series of three beeps is transmitted from the …

For wireless operation, press and hold the ON/ OFF Switch on the Remote for approximately 3 seconds until the red indicator light comes on, indicating the Remote Control is ready for use.

*Some applications are not suitable for wireless communication. Keep in mind that the rated range is subjective, and depends on factors such as obstructions, frequency interference, transmission …

New Wireless Remote Part# 04154-1B (Operates with 12 or 24v DC) (Remote Green) (Remote - Yellow) (Remote - Red)